super-bright type led elite enterprises (h.k.) co., ltd. 10mm super-bright type flat 2505, 25/f., nanyang plaza, 57 hung to road, kwun tong, h.k. tel: (852) 2723-3122 fax: (852) 2723-3990 email: info@elite-ent.com.hk features package dimensions high intensity wide viewing angle general purpose leads reliable and rugged absolute maximum ratings at ta=25 parameter max. unit power dissipation 100 mw peak forward current (1/10 duty cycle, 0.1ms pulse width) 100 ma continuous forward current 40 ma derating linear from 50 0.4 ma / reverse voltage 5 v operating temperature range -40 to +80 storage temperature range -40 to +80 lead soldering temperature [4mm(.157?) from body] 260 for 5 seconds notes: 1. all dimensions are in millimeters (inches). 2. protruded resin under flange is 1.0mm (.04?) max. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice. (ta=25 ) part no. emitting color lens color peak wavelength p (nm) vf (v) i f = 20ma (note e1) iv (mcd) (note e2) viewing angle 2 1/2 (deg) (note e3) min typ min typ el-10r641 red red diffused 660 1.6 ? 1.8 30 ? 250 60 el-10g641 green green diffused 568 1.7 ? 2.2 25 ? 100 60 el-10y641 yellow yellow diffused 590 1.7 ? 2.0 100 ? 400 60 el-10r242 red water clear 660 1.6 ? 1.8 100 ? 450 20 EL-10G242 green water clear 568 1.7 ? 2.2 120 ? 400 20 el-10y242 yellow water clear 590 1.7 ? 2.0 180 ? 550 20 el-10r243 red red transparent 660 1.6 ? 1.8 100 ? 450 20 el-10g243 green green transparent 568 1.7 ? 2.2 80 ? 320 20 el-10y243 yellow yellow transparent 590 1.7 ? 2.0 180 ? 550 20 parameter test condition luminous intensity i f = 20ma (note e1. luminous intensity is measured with a light sensor and filter combination that approximates the cie eye-response curve.) viewing angle (note e2. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.) peak emission wavelength i f = 20ma dominant wavelength i f = 20ma (note e3: the dominant wavelength ( d) is derived from the cie chromaticity diagram and represents the single wavelength which defines the color of the device.) spectral line half-width i f = 20ma forward voltage i f = 20ma reverse current i f = 20ma unit: mm (inches) tolerance: 0.25mm (.010?) max
|
